PF Impact crusher for stone crushing plant

Detailed Product Description
Mint Condition,
Wear-resisting,
Simple Opeation,
Worthy Quanlity,
Good Price.

PF Series Impact Crusher is a new product that absorbs advanced technologies at home and abroad. This Series equipment; Is applicable to crush the material with size less than 500mm and compression strength less than 320 MPa (eg: Granite, limestone, concrete etc. ).

With its excellent performance, Impact Crusher is widely used in highway, hydroelectric, artificial stone and sand, crushing and building material industry etc. PF Series Impact Crusher has advantages such as simple structure, large crushing ratio, low energy consumption, high output, light weight, cubic final product and so on. It is used in mineral processing, chemical, cement, construction, refractory material.

1. Many cavities to crush, suitable for crushing hard rock.
2. Low and big feed opening makes the production line easy to arrange and increases the feeding material size.
3. New anti-abrasive material makes longer service life of blow bar, impact plate and liner plate.
4. High-chromium blow bar and unique impact liner plate are especially suitable for hard rock crushing, high efficiency and energy conservation.
5. Reasonable design of leveling plate making charge finer and cubic without interior cracks.
6. Product shape is cubic and discharge material size can be adjustable.
7. Simplify crushing circuit.
8. Use the hydraumatic to open, easy to maintain and change wear-parts.

The quality guarantee is 12 months after finishing thetrial runof machines whichhas been shipped to the buyer side. If any part (excluding easily damaging parts) is found defective in quality within warranty period,we would like toreplace it for free. After warranty, spare parts can be replaced based on favorable price.

Contact person: cassie ai
Tel: 0086-371-67996871
E-mail: xbzg.com@gmail.com
WEB: http://www.xbzg.com

the best liner crusher wear parts

Detailed Product Description
1. the best liner
2.Used for jaw crusher
3.Fixed and swing
4.Lastingness,hardness
5.Customer designed

A.Material Specifications ofliner :

High Chrome Casting Material Chemical Composition
Code Elem.	C	Si	Mn	Cr	Mo	Na	Cu	P	S	HRC
KmTBCr4Mo	2.5-3.5	0.5-1.0	0.5-1.0	3.5-4.5	0.3-0.5	-	-	≤0.15	≤0.10	≥55
KmTBCr9Ni5Si2	2.5-3.6	1.5-2.2	0.3-0.8	8.0-10.0	0-1.0	4.5-6.5	4.5-6.5	-	-	≥58
KmTBCr15Mo	2.8-3.5	≤1.0	0.5-1.0	13-18	0.5-3.0	0-1.0	0-1.0	≤1.0	≤0.06	≥58
KmTBCr20Mo	2.0-3.3	≤1.2	≤2.0	18-23	≤3.0	≤2.5	≤1.2	-	-	≥60
KmTBCr26	2.3-3.3	≤1.2	≤1.0	23-30	≤3.0	≤2.5	≤2.0	-	-	≥60

Above materials are normal specifications. Meanwhile, we also provide customised materials to our customers.

B.Manufacturing Processes ofliner :

1.Analyse the Raw Material Chemical Composition.

2.Sand-Model or Other Shaping Methods.

3.Pouring the melten steel into modes.

4.Quenching work piece with special H.T. Procedures.

5.QC Technicans inspect the products with the qualith control sheet.

6.Surface Treatment.

7.Finally, finish the last processes and cover the protection coat.

C.SGS Certificate:

D.Impact Crusher Parts List:

PFand PEX Series Crusher Typical Wearing Parts
Model	Parts Name	Material	Working Situation	Hardness(HRC)
P1214-(Exampled Model)	Impact Plate	ZGMn13Cr2/Tailored Material	vulnerable	-
	Impact Rack	ZGMn13Cr2/Tailored Material	vulnerable	-
	ScaleBoard	ZGMn13Cr2/Tailored Material	vulnerable	-
	Blow Bar	KmTBCr26/Tailored Material	vulnerable	≥60
	Pressing Block	ZGMn13Cr2/Tailored Material	vulnerable	-
PEX-1010 (Exampled Model)	Impact Plate	ZGMn13Cr2/Tailored Material	vulnerable	-
	Impact Rack	ZGMn13Cr2/Tailored Material	vulnerable	-
	ScaleBoard	ZGMn13Cr2/Tailored Material	vulnerable	-
	Blow Bar	KmTBCr26/Tailored Material	vulnerable	≥60
	Pressing Block	ZGMn13Cr2/Tailored Material	vulnerable	-
For Further Information, Pls See Blow Brief During or Contact Us

E.Some Similar Photos

F.For further information, Pls visite or contact us.

Contact person: cassie ai
Tel: 0086-371-67996871
E-mail: xbzg.com@gmail.com
WEB: http://www.xbzg.com